Home Collections hardware

Collection: hardware

Compare (0/5)

170 products

Filter

Sort by:

Price

The highest price is $808.28 From To

From $

To $

Finish

Abrasive Grit 1
Aluminum Oxide Abrasive 1
Antique Brass 1
Black Polyethylene 1
Brass 7
Brass 1
Brushed Nickel 7
Chrome 13
Chrome Plated 4
Copper 1
Cotton White 1
Cotton White (Vitreous China Glaze) 1
Epoxy Powder-Coated Gray 1
Forged Brass Body 1
Matte Black 1
Nylon 1
Plastic 2
Plastic Housing 1
Plastic/Rubber 1
Polished Brass 2
Polished Chrome 3
Satin Chrome 1
Satin Nickel 3
Satin Stainless Steel 1
Stainless 1
Stainless Steel (Cover Plate) 1
Stainless Steel Braided 1
Standard Bronze 1
Thermoplastic, Zinc-Coated Motor Housing 1
UV Resistant Polymer 1
White Powder Coat 1
White Powder-Coated 1
Zinc Nickel-Plated 1
Zinc Plated 1

Installation Type

3-Hole, 4-inch centerset 1
3-hole widespread, Wrench-Free Connection 1
4-Hole 8-inch Centers Deck Mount 1
4 Inch Centerset, Top-Drop Mount 1
-deck serviceable Commercial lavatory installation, requires 3/8" supply lines 1
1 or 3 Hole, 4-inch configuration 1
Above Deck Mixer, Retrofit/New construction 1
Adhesive tape application to existing shrink wrap, tarp, or plastic sheeting 1
Banded Coupling (Shielded) 1
Commercial rough-in, requires carrier/frame, professional installation 1
Deck Mount, 4" Centerset 1
Deck Mounted 5
Deck-mounted, requires 1/2" NPSM water supply 1
Deck-mounted, standard 4" center-set configuration 1
Direct Replacement 1
DIY, Fits Standard Prepped Doors 1
Door bore installation with adjustable latch 1
Exposed plumbing, Top-spud urinal 1
Faucet repair/replacement 1
Fits 1/4" or 3/8" hex impact drivers & drills 1
Fits into 8"x8" Duct Opening 1
Floor Mounted 1
Floor Mounted, Two-Piece 1
Hand Tool, No Installation Required 2
Handheld 2
Horizontal or vertical mount with ring isolators, direct drive 1
Horizontal shaft orientation, requires proper ventilation for air-over cooling 1
In-wall 1
In-Wall, Behind Drywall 1
In-wall, behind shower trim 1
Includes Adjustable Mounting Arm 1
Manual Use 1
Mounts on Compatible Chop Saw 1
Mounts with Fastener through Center Hole 1
Non-Handed, Reversible for LH/RH Doors 1
Press-Fit (Requires Compatible MegaPress Tool) 1
Press-Fit (Requires Compatible Press Tool) 1
Push Connect 1
Push-to-Connect (No Tools) 1
Requires Rough-In Valve, Back-to-Back Capable 2
Screw mount, Back wire terminals 1
Screw onto Garden Hose 1
Screw-In 2
Screw-in (NPT), Bolted flange connection 1
Screw-in, surface mount 1
Screwdriver installation; adjustable latch. 1
Single-Hole or 3-Hole (4" centers) with deck plate 1
Sits in sump basin, vertical installation 1
Slip joint connection 1
Slip-Joint / Threaded Connection 1
Stay·Tite commercial fastening system 1
Surface Mount Over Latch 1
Sweat (Soldered) Connections 1
Tool-Free Hand Tighten 1
Tool-Free, Standard Wall Connection 1
Tub Drain & Overflow Assembly 1
Vertical/Horizontal 1
Vertical/horizontal installation, requires air gap at vent, union connections 1
Wall mount, DIY 1
Wall Mount, Requires Separate Rough-In Valve 1
Wall Mounted 3
Wall-mount, pairs with in-wall valve 1
Wall-Mount, Top Spud Inlet 1
Wall-mounted flush valve; requires 1-1/4" V-B connection 1
Wall/Ceiling Mount 1
Wrench/Socket Drive, Pilot Hole Recommended 1

Number Of Handles

Number Of Holes

Type Of Faucet

Centerset 2
Single Hole 1

Shower Type

Shower Heads 1
Shower Only 1

Special Features

5-2 day programming, compressor protection 1
1M Cycle Cartridge, ADA Lever, Lead Free, Flow-Rate Adjustable (0.35-2.2 GPM) 1
3-Spray Shower Head, Touch-Clean Spray Holes, Includes Pressure-Balance Cartridge, Back-to-Back Installation Capable 1
4-Speed, Automatic Thermal Protection, Double Shaft, Sleeve Bearings 1
4-Way Fixed Curved Blades, Multi-Shutter Damper, Bar Spacing 1", Powder-Coated Steel 1
4 Spray Settings, Touch-Clean Nozzles, 60" Metal Hose, Adjustable Mount, WaterSense (1.75 GPM) 1
20-Gauge Brass, Corrosion-Resistant, Partially Threaded Ends 1
1/3 Inch Fin Spacing, 50-Degree Blade Angle, White Powder Coat Finish 1
90-degree elbow, push-connect design, brass construction 1
Adjustable bend radius, UV resistant, one-person installation, TAA/BAA compliant 1
Adjustable Nozzle Seal, Compact, No Electricity Required 1
All-metal construction, includes matching drain and supply lines 1
Audible confirmation, anti-cross-threading, kink-resistant 1
Battery-free/wire-free, self-adjusting sensor, 10-second metered flow, vandal-resistant 1
Bi-metal HSS construction, extra lead screw included, wrench included 1
Ceramic Disc Cartridge, Adjustable Hot Limit Safety Stop, Integrated Speed Connect Drain 1
Ceramic disc valve; includes push pop-up drain; temperature indicators (red/blue) 1
Cleanout plug, Chrome plated brass, 22-gauge construction 1
Complete set with backplates, die-cast construction 1
Contoured Grip 1
Corrosion-Resistant, Non-Metallic (Nylon), Saddle-Style, for Masonry 1
Disposable Design, Natural Bristles, Bulk Pack 1
Double-Sided Zipper Slider, UV Resistant, Heavy-Duty 10 Mil, Includes Installation Tape 1
Dual check valves, FDA-approved seals, forged brass construction, 210°F rating 1
Durable ceramic discs, corrosion-resistant brass housing, OEM precision fit 1
E-Max 1.28 GPF Flushing System, Universal Height (ADA), Elongated Bowl, Chrome Trip Lever, Vitreous China 1
Easy-to-use 1
EcoPower hydropower self-generating system; sensor-activated; superior piston valve. 1
Egg Knob Design 1
EPDM gasket, Cast iron construction, Kit includes hardware 1
EPDM O-Ring for Seal, Rated 200 PSI, No Soldering/Threading Required, PC603 Series 1
Exact fit for Carrier/BDP, permanent split capacitor (no start switch), Class B insulation 1
Fire-retardant, Antimicrobial, Self-sustaining hinge, Made in USA 1
Flat Front Design 1
Flexible, Accommodates Pipe Offsets, Resists Shear Forces & Earth Loads 1
Hands-free sensor, Infrared proximity, Battery-powered, Cast brass construction 1
Hex Head for High-Torque, Corrosion-Resistant Zinc Plating, Gimlet Point, Coarse Lag Thread 1
High-Arc Gooseneck, 360° Swivel, Integrated Anti-Siphon Device, Ceramic Cartridge Valve 1
HNBR O-Ring, Pre-applied Thread Sealant, Certified for Gas & Water, Zinc Nickel Plating 1
ID Length 3 Broach G; solid brass construction; direct OEM equivalent 1
In2ition 2-in-1 System, 3-Way Diverter, Touch-Clean Spray Holes, WaterSense Certified, 4 Spray Settings with Pause Function, Stretchable Metal Hose (60"-82") 1
Includes pop-up drain; red/blue temperature indicators; WaterSense (1.2 GPM). 1
Integrated 1/4-Turn Valve, Built-in Water Hammer Arrestor, One-Piece Box/Flange, Snap-On Faceplate 1
Keyed Alike 1
Lead-free brass, compact space-saving design, dual accessory tappings (1/4" & 1/8" FPT), functions as check valve and control center 1
Lift and Turn Stopper, Pressure Test Port, One-Hole Overflow Plate 1
Monitor Pressure Balance Valve, Touch-Clean Spray Holes, WaterSense Certified, ADA Compliant, Back-to-Back Installation 2
No-Key Exterior (Interior Only Turn), Adjustable 2-3/8"/2-3/4" Backset, SCS Reinforced Strike Plate, Microban Finish, Includes SmartKey® Tool 1
Patented Air Relief Valve, Funnel-Nose 90° Seal, 8-Cup Displacement, Includes Storage Bucket 1
Pre-punched holes, satin finish, pack of 10 for multi-door projects 1
Privacy Function, Clutch Design (Survivor Clutch), Cast Stainless Steel Retractor, Bronze Bearings, Fire Rated, ADA Compliant 1
Push-Pop Drain, Quick-Connect Installation, WaterSense Certified, Corrosion & Chemical Resistant Finish 1
Reusable 1
Screw-Feed Mechanism, Replaceable Cutting Wheel, Built-in Deburring Tool, Corrosion-Resistant Coating 1
Self-generating hydropower, Self-adjusting IR sensor, Manual flush override, Automatic maintenance flush 1
Self-powered (battery), diagnostic LEDs, bi-stable solenoid (saves water/power), automatic sensor setting 1
Sharp aluminum oxide grit, durable C-weight paper backing, resin bond for longevity 1
Solar-powered, Infrared sensor, Vandal-resistant, Chloramine-resistant 1
Solid brass body, ceramic disc cartridge, three independent outlets with positive shut-off, drip-free operation 1
Solid brass construction, mid-arc spout design, corrosion resistant, compact deck footprint 1
Splash Resistant 1
Thermal expansion relief with isolation ball valve 1
Thermostatic safety, anti-scald, solid brass construction 1
Triple-wipe brass contacts, Break-off split-circuit tab, Impact-resistant nylon 1
Tulip style knobs, adjustable backset (2-3/8" to 2-3/4"), dead latch. 1
Two-port configuration, solid cast brass construction, flange inlet 1
Type 1 Flat Wheel, Thin Profile for Fast Cutting, High RPM Rating (4365 RPM) 1
Ultra-high efficiency (HET), washout flush, easy-clean trap, anti-splash design 1
Ultra-Low 1.0 GPM Flow, Ceramic Disc Cartridge, Includes Push Pop-Up Drain, Red/Blue Temp Indicators, Polymer Braided Supply Lines 1
Universal Chair-Height, Dual-Max Gravity Flush, Elongated Bowl, Dual-Flush (1.0/1.6 GPF), Easy-Clean Glaze 1
Universal handing; adjustable backset (2-3/8" and 2-3/4") 1
Versatile single/3-hole install, Ceramic disc valve, Polymer braided hoses 1
Vertical float switch, thermal overload protection, stainless steel hardware 1
WaterSense certified, Ceramic disc valve, Quarter-turn handles 1
Wet Line Compatible, No Tools/Solder/Glue, Multi-Material Compatibility 1
Wrap-Around 1

Compare: